BLT-HD LDAC/aptX HD Bluetooth 5.1 Hi-Fi Receiver with TI DAC, Long-Range, RCA Stereo, Optical (Toslink) & Coaxial S/PDIF Outputs

NOT SUITABLE AS A BLUETOOTH TRANSMITTER to Bluetooth-enable your TV, A/V receiver to stream music wirelessly to your Bluetooth headphones or speakers.

BluDento Bluetooth music receivers can be compatible with a variety of operating systems, including: Windows, MacOS, Linux, Android, iOS.

Equipped with the best in class veridical Hi-Fi 384kHz/32bit upsampling audiophile DAC PCM5102A by Texas Instruments that sports a high SNR of 112dB and is well regarded for its impressive low noise and low distortion characteristics. In short, this designates that the sound you aurally perceive is crystal clear, affluent and retains a sublimely full dynamic range.

Q: Why BluDento BLT-HD Lossless Bluetooth Receiver ?

A:

• We have an on-board Texas Instruments DAC PCM5102A for analog output, others do not.
• BluDento automatically enters pairing mode when it is powered on and does not require manual operation.
• Auto Reconnect: Turn on your phone's Bluetooth first, then launch BluDento.
• BluDento does not require a driver and does not require an APP, while WiFi audio receivers require a driver and require an APP.
• Works seamlessly with all your APPs and music. Spotify, Tidal, Qobuz, Pandora - all streaming APPs for instant playback.

Q: Why do I have sound problem when connecting BluDento BLT-HD by optical/coaxial output?

A: Below are some possible causes for this issue:

• The connected home theater system, audio receiver or sound bar is not set to properly decode the digital signal.
• The connected home theater system, audio receiver or sound bar DOES NOT support 96kHz/48kHz sample rate, switch the Bluetooth source device's sample rate to 48kHz/44.1kHz, this usually solves your problem.
• The optical cable is not securely connected.
• The optical cable may be faulty.

Q: How to enter pairing mode?

A: BluDento automatically enters pairing mode( the indicator light flashes blue ) when it is powered on and does not require manual operation.

Q: Is the antenna removable?

A: No, It is not removable.

Q: Can I connect this device to Amazon echo dot ?

A: Yes. make sure to connect BluDento with your stereo via an audio cable, NOT with the echo dot; enter the Alexa app, go to Settings -> Devices/Echo -> Bluetooth -> Pair a New Device -> BLT-HD.

Q: Does this item make an audible sound when it connects to a device?

A: No, it doesn't make any sound when connected/disconnected to a device. You can see it on the dislay screen when the device is successfully connected.

NOTES:

• Antenna: Can be rotated to the left, right, and up; DO NOT rotate it down; it will break if rotated down.
• BOTH model BLT-HD & B2 support LDAC codec.
• ONLY B2 has OLED display and control button.
• ONLY B1 supports NFC quick pairing, ONLY B1 has built-in antenna.
• Please make sure to use a power adapter for power supply, this will eliminate ground loop noise. Please use a 5V power supply! DO NOT use a mismatched power supply (e.g. 9V / 12V) as this may cause the unit to malfunction.
• The iPhone only supports AAC. For LDAC, you can go to Developer Options( Android ONLY ) and select it.

NOT A BLUETOOTH TRANSMITTER

VERSATIBLE COMPATIBILITY

Antenna: Can be rotated to the left, right, and up; DO NOT rotate it down; it will break if rotated down.

AUDIOPHILE SOUND QUALITY